News

Article on ‘Design in India’ by Mr. Vikas Khanvelkar, M.D, DesignTech Systems, published in Industrial Product Finder magazine – India Next ,Make in India, April 2015 issue.

DesignTech Systems Pvt. Ltd. featured in 10 Most Promising PLM Companies - special issue by Silicon India Magazine

Article in OEM Update magazine - May 2015 issue

Mr. Vikas Khanvelkar's interview published in OEM Update Magazine

Article in Efficient Manufacturing magazine - June 2015 issue

DesignTech Systems inks JV pact with Integrity Tool and Mold INC news published in Industrial Products Finder Magazine - July 2015 issue

Imparting education on industry standards article published in Efficient Manufacturing magazine July 2015 issue

DesignTech Systems inks JV pact with Integrity Tool and Mold INC news published in Efficient Manufacturing magazine July 2015

DesignTech Systems & Integrity joint venture news in Automotive Product Finder magazine - Aug 2015 issue

Article on Technology inspired innovation to get product designs right the first time - published in the magazine circulated at Aerospace & Defence Manufacturing Summit 2015

DesignTech Systems inks JV pact with Integrity Tool and Mold INC news published in MACHINE TOOLS WORLD magazine – AUGUST 2015 issue

Mr. Sanjay Daga’s views on “ The changing face of manufacturing ” – published in the cover story of OEM Update magazine – September 2015 issue

Mr. Ravi Patil shares his views on Rise of Hybrid Additive Manufacturing - article published in OEM Update magazine – October 2015 issue

Indian Engineering Institute CoEP establishes CAE Optimization Centre Employing Altair HyperWorks Success story published in the Industrial Automation magazine - November 2015 issue.

“ Leverage Technology for Product Excellence ” post event report featured in the Efficient Manufacturing magazine – November 2015 issue

Avcon Controls - Case Study published in the Industrial Automation magazine – December 2015 issue.

“ Leverage Technology for Product Excellence ” news published in the Machine Tool World magazine – December 2015 issue

Avcon Controls Case Study published in Industrial Product Finder magazine – Feb 2016 issue

Mr Vikas Khanvelkar, MD, DesignTech Systems interview published in Efficient Manufacturing magazine – Jan 2016 issue

DesignTech Systems Article in HAL Aeromag magazine

Post Budget Reactions from Mr. Vikas Khanvelkar, M.D - DesignTech Systems Pvt. Ltd. Published in Modern Manufacturing India magazine – March 2016 issue

Mr Raju Battula , National Manager- Technical Support, DesignTech Systems shares his views on CAD / CAM: What’s the right choice? Published in Cover Story of OEM Update magazine – April 2016 issue.

Article published in Efficient Manufacturing Magazine - April 2016 issue "Getting cast components right the first time”

Authored Article by Mr Raju Battula,National Manager- Technical Support, DesignTech Systems Pvt. Ltd. published in Indian Sheet Metal Review Magazine – April 2016 issue

Premium Transmission Case Study published in Industrial Product Finder magazine – May 2016 issue.

Siemens PLM Software - Jyothy Laboratories Case Study published in Industrial Automation magazine- May 2016 issue.

Symbiotic Learning by Design - Stratasys - Case Study published in Industrial Automation magazine- May 2016 issue.

Avcon Controls - Case Study published in Indian Sheet Metal Review magazine – May 2016 issue

Mr. Vikas Khanvelkar's views published in OEM Update - June 2016 issue

Authored article on Evolution of 3D Printing Technology and the Indian industry by Mr. Rohit Arora, Country Manager – Sales, DesignTech Systems Pvt. Ltd. published in Industrial Product Finder magazine – July 2016 issue

Bridging the gap…Article on Training authored by Mr. Prashant Deshpande, Sr. Business Manager – Education and Training , DesignTech CAD Academy - published in Efficient Manufacturing – Aug 2016 issue

DesignTech presented end-to-end solutions in product design, development and manufacturing at their Technology event in Kolkata; event synopsis covered in Efficient Manufacturing August 2016 issue

DesignTech Systems presented CAD/CAM/CAE, PLM and Additive Manufacturing technologies from Siemens PLM software, CAE suite of solutions from Altair Engineering; 3D Printing technologies from Stratasys;MATLAB from MathWorks and Metal 3D Printing solutions from SLM at their Technology seminar in Kolkata. Event synopsis published in Industrial Product Finder magazine – Aug16 issue.

With Stratasys FORTUS 900MC 3D Printer- Nashik Engineering Cluster, can now serve their customers needs faster, cheaper and better than ever. Nashik Engineering Cluster - Case study for Stratasys - published in Industrial Product Finder magazine – September 2016 issue.

DesignTech Systems organized technology seminar in Kolkata to showcase the latest and most advanced technologies in product design, analysis, validation and manufacturing .Event synopsis published in Machine Tool World magazine – Sept 2016 issue.

DesignTech Systems hosted Technology symposium in Mumbai on how advanced technologies in product design, analysis, validation and manufacturing, help companies build better products faster, economical and better than before. Achieve Product Excellence through Technology Impetus- Event Synopsis published in Industrial Product Finder magazine – October 2016 issue.

Stratasys Dimension 3D printer reinvents Engineering Learning Process at National Institute of Technology ,Warangal – Case Study published in Industrial Automation magazine – October 2016 issue.

DesignTech Systems organized a technology seminar ‘Achieve Product Excellence through Technology Impetus’ at Mumbai. The aim of this event was to showcase the latest and most advanced technologies in product design, analysis, validation and manufacturing to help companies build better products faster, economical and better than before. Event report published in Industrial Automation magazine – November 2016 issue.

DesignTech to implement Siemens PLM Software Teamcenter for Azafran Organics - Press Release published in Machine Tool World Magazine – December 2016 issue.

Mr. Atul Marwaha's High Profile Indian Business Delegation visit to Frankfurt published in Indo-German Economy(IGE) Magazine

DSK International Campus (DSKIC) - Case study for Stratasys published in Machine Tool World Magazine – Jan 2017 issue.

Matrix Tools and Solutions Case Study published in Industrial Product Finder Magazine- January 2017 issue.

LABOMED brings high-end microscopes and diagnostic medical devices designed with the help of Stratasys 3D Printing published in Express Pharma – February 2017 issue.

DesignTech Systems partners with Solidscape to launch 3D Printers in India. News in Deccan Chronicle

Budget Reaction from Mr. Vikas Khanvelkar, Managing Director, DesignTech Systems Pvt. Ltd. published in Machine Tool World magazine – February 2017 issue.

National Institute of Technology (NIT), Warangal Case Study published in Industrial Product Finder Annual 2017 issue.

DesignTech Systems launches 3D Printers in partnership with Solidscape News published in Machine Tool World magazine – March 2017 issue

DesignTech partners with Solidscape to launch advanced 3DPrinters in India News published in OEM Update magazine – March 2017 issue

Harita Seating Standardizes on Altair Suite of HyperWorks™ for all CAE Applications.Case Study published in Industrial Product Finder magazine – April 2017 issue.

Mr Vikas Khanvelkar, M.D, DesignTech Systems Ltd, showcases an interesting perspective on the Indian Machine Tool industry. Interview published in Industrial Product Finder magazine – June 2017 issue.

Mr. Vikas Khanvelkar, M.D, DesignTech Systems, interview on ‘DIGITALe INDIA’published in OEM Update Magazine – June 2017 issue

Mr. Atul Marwaha, Senior Vice President (Services & Trainings), DesignTech Systems Ltd, shares his views on Automotive Design & Software. “ Harmonising Vehicle Design via Software Optimization” industry story published in Auto Tech Review Magazine - June 2017 issue.

Jyothy Laboratories Case Study for Siemens PLM Software published in Automation & Drives Magazine April -May 2017 issue.

Mr. Raju Battula, National Manager- Technical Support, DesignTech Systems shares his views on “ Why CAD/CAM automation software.” Industry story Published in OEM Update magazine – Aug 2017 issue.

Altair HyperWorks enables ICAT achieve Robust Structural Integrity of Automotive Components. Read Altair – ICAT Case Study published in Machine Tools World magazine – August 2017 issue.

Driving towards greater simulation accuracy. Mando Softtech India Case Study for Altair published in A&D India magazine Aug – Sept 2017 issue.

Topology Optimization of an Unmanned Aerial Vehicle (UAV) Airframe Structure. Case Study published in Industrial Automation magazine – October 2017 issue.

Subros leverages Altair HyperWorks to build optimised product designs. Case Study published in Industrial Product Finder magazine - October 2017 issue.

Premium Transmission – Stratasys Case Study published in MACHINE TOOLS WORLD magazine November 2017 issue.

IR India Case Study for Siemens PLM developed by DesignTech Systems team published in Industrial Product Finder magazine - January 2018 edition.

Endurance Technologies Case Study published in Machine Tools World magazine January 2018 issue.

Industrias del Recambio India Success Story for Siemens PLM developed by DesignTech Systems published in Industrial Automation magazine - January 2018

Mapping the Growth of Metal Forming Dr. Laxminarayan K., DesignTech Systems Pvt. Ltd. views on Metal Forming Industry Cover Story published in OEM Update magazine - IMTEX 2018 special issue January

Subros Leverages Altair Solutions to Optimise Product Designs Subros Limited Success Story for Altair Engineering solutions published in Automotive Product Finder magazine January 2018 issue.

Mr. Vikas Khanvelkar, M.D, DesignTech Systems interview on “ Manufacturing – a huge potential for India” published in Efficient Manufacturing magazine January 2018 issue.

Endurance Technologies Case Study for Altair Engineering published in Industrial Product Finder magazine – February 2018 issue.

Nashik Engineering Cluster (NEC) Case study for Stratasys 3D Printer published in Efficient Manufacturing magazine February 2018 issue

Mr. Vikas Khanvelkar, M.D, DesignTech Systems interview on “ Manufacturing 2020 ” published in Industrial Products Finder magazine Annual 2018 Issue

Mr. Raju Battula, DesignTech Systems Ltd views on Die & Mold Industry Cover Story published in OEM Update magazine April 2018 issue

Burckhardt Compression - Siemens - Case Study developed by DesignTech Systems published in Industrial Automation magazine - May 2018 issue

Mr. Vikas Khanvelkar, M.D, DesignTech Systems, authored article - “ ‘Make’ to ‘Design’ in India: An Emerging Paradigm” published in Industrial Products Finder, magazine May 2018 issue

Burckhardt Compression - Siemens - Case Study developed by DesignTech Systems published in Automotive Products Finder magazine - May 2018 issue

Sujan CooperStandard Achieves Lightweighting and Performance Targets with Altair HyperWorks. Case Study published in Efficient Manufacturing magazine - May 2018 issue

Endurance Technologies Case Study for Altair Engineering developed by DesignTech Systems published in Efficient Manufacturing magazine - June 2018 issue

Sujan CooperStandard - Altair - Case Study published in Industrial Products Finder magazine July 2018

Sujan CooperStandard - Altair - Case Study published in Automotive Products Finder magazine July 2018

Mr Vivek Mahajan, DesignTech Systems views on Product Lifecycle Management published in Automotive Products Finder magazine August 2018 issue.

Mando Case Study published in Automotive Products Finder Magazine – August 2018 issue

Amber Case Study published in Industrial Products Finder Magazine - August 2018 issue

Karnataka Engineering Enterprises Case Study published in Efficient Manufacturing August 2018 issue

DesignTech Systems signs MoU with Instrumentation Automation Surveillance and Communication ( IASC ) Sector Skill Council

IFB Home Appliances Improve Lives through Excellence in Functionality made possible with FDM Technology. IFB Industries Ltd. Case Study for Stratasys published in Machine Tools World Magazine _ October 2018 issue.

JOURNEY TOWARDS PRODUCT EXCELLENCE . IFB Case Study published in Efficient Manufacturing magazine October 2018 issue .

Mr. Vikas Khanvelkar, Managing Director, DesignTech Systems Pvt. Ltd. shares his views on “ Skill Development in Manufacturing Sector ” . Read the interview published in TAGMA Times magazine.

DesignTech works as a ‘Mech-in-India’ Partner to the World’s First Nuclear Fusion Reactor. Read ITER ( International Thermonuclear Experimental Reactor ) Case Study published in Industrial Automation magazine.

The International Centre for Automotive Technology ( ICAT ) Success Story covered in Automotive Products Finder magazine December 2018 issue

International Thermonuclear Experimental Reactor Case Study published in Industrial Products Finder Magazine February 2019

Pragati Engineering Success story published in Modern Manufacturing India magazine January - February 2019 issue.

INTECH DMLS achieves 27 % weight reduction in 3D Printed satellite component using Altair Inspire and OptiStruct - Altair Engineering Case Study published in Industrial Automation Magazine – March 2019 issue.

Guru Nanak Dev Engineering College (GNDEC) Case Study for Stratasys published in Express Healthcare Magazine March 2019 issue

IMPERIAL AUTO Case Study for Altair Engineering published in Automotive Products Finder - March 2019

Pragati Engineering Case Study published in TAGMA TIMES magazine March – April 2019 issue.

" DesignTech Designs-for-Manufacturing the Industrial Radiators for a leading Canadian Manufacturer “ Read DesignTech Engineering Services - Success Story published in OEM Update magazine April 2019 issue

Pranav Vikas Achieves 17% Material Savings with Light Weight and Optimised Product Designs using Altair HyperWorks™ Solutions. Read Case Study published in Industrial Automation magazine May 2019 issue.

Mr. Vikas Khanvelkar, Managing Director, DesignTech Systems interview published in Machine Tools World magazine – June 2019 issue DesignTech Systems: Helping in Harnessing the Power of IoT in Manufacturing

DesignTech Engineering Services Success Story published in Engineering Review magazine July 2019 issue.

DesignTech Systems: Propelling Engineering Excellence with Latest Technologies - Engineering Review magazine August 2019

Supreme Industries Stratasys Case Study published in TAGMA Times

Mr. Vikas Khanvelkar, Chairman & Managing Director, DesignTech Systems shares his views on CAD CAM in Manufacturing published in Manufacturing Today magazine September 2019 issue

Supreme Industries Case Study for Stratasys 3D Printer developed by DesignTech Systems published in Engineering Review Magazine – October 2019 issue

Vikas Khanvelkar, Managing Director, DesignTech Systems shares his views on how Software tools can be used for achieving Manufacturing Excellence to increase competitiveness. Read Interview published in Smart Manufacturing magazine – November 2019 issue.

Mr Ganesh Babu’s views on Additive Manufacturing industry story published in A&D - Automation & Digitisation magazine December – January 2020 issue

Embracing Technology for progress - Abhijit Kulkarni, DesignTech Systems . Read Article published in OEM Update Jan 2020 issue

DesignTech Systems: Fostering Technology Adoption in Indian Industry Read Mr Santosh Kawade, Deputy General Manager – South, DesignTech Systems interview published Engineering Review Magazine January 2020

Mr. Mahesh Kothawale shares his optimism on Additive Manufacturing for the tooling industry - published in Tagma Times- January 2020 issue.

Bringing Design Accuracy to Healthcare Products. GSK Consumer Healthcare-Stratasys J750 3DPrinter CaseStudy published in Engineering Review magazine - May 2020

GSK Consumer Healthcare-Stratasys J750 3DPrinter Case Study published in A&D India magazine – June - July 2020 issue

Mr. Vikas Khanvelkar , Managing Director, DesignTech Systems views published in Machine Tools World Magazine June 2020 issue

Mr. Ganesh Babu, DesignTech Systems views on 3D Printing in Automotive published in OEM Update Magazine July 2020 issue.

The Role of Additive Manufacturing in Medical field - Article by Mr Ravi Patil - DesignTech Systems published in Industrial Automation Magazine- August 2020 issue

Design and Validation of High Pressure Casing of a Steam Turbine - Article by Dr. Laxminarayan K. published in PowerTech Review Magazine July-August 2020 issue

“Design and Validation of High Pressure Casing of a Steam Turbine” - Authored Article by Dr. Laxminarayan K. published in Engineering Review Magazine - August 2020 issue

Shiva Tool Tech Altair Inspire Cast Case Study published in A&D India August- September 2020 issue

Role of 3D Printing in Advanced Manufacturing - Article from Ganesh Babu , DesignTech Systems published in Industrial Automation Magazine - October 2020 issue

Mr. Vishal Bagthadia’ s views on How e-mobility will drive the demand for die & mould in India published in OEM Update Magazine – October 2020 issue

Lakshmi Machine Works (LMW) - Case Study published in Industrial Products Finder Magazine – November 2020 issue

Match-Well Die Cast - Case Study published in Industrial Products Finder Magazine – December 2020 issue

Read Imperial Auto - Altair Engineering - Case Study developed by DesignTech Systems published in Efficient Manufacturing Magazine - February 2021 issue.

Read Mr.Vikas Khanvelkar, Managing Director - DesignTech Systems, views on Budget 2021 published in Efficient Manufacturing Magazine.

Read Coimbatore Institute of Technology Stratasys Case Study published in TAGMA TIMES magazine

Read Vikas Khanvelkar, Chairman & Managing Director - DesignTech Systems,interview published in Machine Tools World Magazine.

DesignTech Systems Launches Free Augmented Reality based App to help COVID-19 Patients Set up Oxygen Cylinder at home Read Mr. Atul Marwaha, Executive Vice President, DesignTech Systems, interview published in Indian Express

DesignTech Systems Launches Free Augmented Reality based App to help COVID-19 Patients Set up Oxygen Cylinder at home Read news published in Industrial Health and Safety Review Magazine - May 2021 issue.

Raju Battula - DesignTech Systems shares his views on " How is Industrial Internet of Things (IIoT) driving the manufacturing transformation across industry segments". Read Interview published in Industrial Automation magazine October 2021 issue.

Augmented Reality: Immaculate Digital Experiences for Manufacturing Sector Read Mr Atul Marwaha, Executive Vice President, DesignTech Systems views published in Smart Manufacturing magazine - Nov 21' issue

Product development companies are adopting AugmentedReality (AR)/ Mixedreality (MR) experiences. Read Mr Atul Marwaha, DesignTech Systems interview in Industrial Automation Magazine.

Mr. Yashwant Landge, DesignTech Systems,interview published in TAGMA TIMES Magazine latest issue.

Altair Simulation Helps Jyoti CNC Improve Their Machine Performance Read Case Study published in Industrial Automation Magazine May 2022 issue.

Altair Simulation Helps Jyoti CNC Improve Their Machine Performance Read Case Study published in Efficient Manufacturing Magazine May 2022

Mr. Vikas Khanvelkar's views on "Using AR experiences companies can build a library of training material". Read interview published in Industrial Automation

Mr. Vikas Khanvelkar's views on DesignTech journey, core values and future plans in terms of growth and expansion. Read interview published in Executive Magazine - July 2022 issue

Stratasys Case Study on Amber Enterprises - 3D Printing enables Air Conditioner Solutions Provider to reduce design validation time by 80 percent. Read the case study published in Machine Tool World Magazine.July 2022 issue

Stratasys - Pavna Group Case Study published in Engineering Review Magazine September 2022 Issue.

Mr. Santosh Prasad's views on 'Manufacturing SME's should evaluate new technologies'. Read interview published in Tagma Times - August 2022 issue.

Altair - LMW Leverages Simulations for new product design case study publish in Machine Tool Magazine December 2022 Issue

IBM - Leading the way in Training on Cutting Edge Software Technologies Publish in Sakal Marathi News Paper in Thursday, 29 December 2022

Mr. Atul Marwaha's views on "Industry 4.0 is something that is just around the corner" - Published in the cover story of Industrial Automation Magzine - January 2023 Issue

“DesignTech: Helping Industry Leverage New-Age Technologies to Build Better Products," Vikas Khanvelkar, Chairman and Managing Director, DesignTech Systems, coverage published in MACHINE TOOLS WORLD magazine's January 2023 issue.

"DesignTech envisions being a preferred Digitalization Solutions & Implementation Partner for the Manufacturing Sector", says Mr. Vikas Khanvelkar, Managing Director, DesignTech Systems in conversation with Machine Tool World Magazine, June 2023 issue.

"DesignTech: Shaping the Future of Aerospace with Superior 3D Printing". Mr. Ravikumar Patil, GM - DesignTech Systems, in conversation with The Machining World Express article covered in May 2024 edition.

"DesignTech’s Advanced CAD and CAE Solutions Enhance Automotive Machining Precision and Efficiency" says Mr. Rohit Arora Executive Vice President, DesignTech Systems Pvt. Ltd

Experience with Integrating 3D Printing in Die and Mould Manufacturing